Baileigh RDB-050 Manual Tube Bender

Description

Baileigh RDB-050 Manual Tube Bender
Product Details
REVOLUTIONARY DESIGN: Can bend 2-inch OD chromalloy or 2.5-inch OD mild steel.
3 BENDING SPEEDS: 4, 8, or 12 degrees per pull.
FAST CHANGEOVERS: Quick-release hook arm inserts assist when you’re changing over the machine to a different size of tubing.
NO NEED TO RESET: Bends up to 200 degrees in one shot, no need to stop and reset the machine.
ANTI-SPRINGBACK MECHANISM: Holds each bend in place as the operator ratchets forward.
Do you need an affordable but powerful bender with enough capacity for nearly any chassis fabrication shop? Baileigh’s patented RDB-050 Manual Tube Bender is revolutionary in function, capacity, and efficiency.This bender has three selectable bending speeds. Speed One produces 4 degrees per pull (has the most torque and would be used for bending 2-inch OD chromalloy or 2.5-inch OD mild steel). Speed Two produces 8 degrees per pull (for intermediate materials). Speed Three produces 12 degrees per pull (for lighter gauge materials). Also, this bender can bend in one shot without having to stop and reset the machine. The manual tube bender has no disassembly or assembly needed to produce a bend. Simply walk up to the machine and put your tubing into the hook arm insert and begin bending. When the bend is complete, return the machine to the home position and pull your bend out (or position it for the next bend). The tube bender can bend up to 200 degrees, and an anti-spring-back mechanism holds each bend in place as the operator ratchets forward. All pivot points utilize aluminum bronze bushings and thrust washers, for long life. The hook arm has quick release inserts to assist when changing over the machine to a different size of tubing. A complete changeover should take no more than a minute. It comes complete with the stand, bend handle, and degree dial. Just add tooling and the operator is ready to bend tube.